PoE Switch
FV-EH10P2SC-E
Key Features
- 802.3af/at PoE standard
- 8-core power supply technology, reducing the power circuit loss
- Data monitor and control for the important ports
- EXTEND mode available to extend the network cable transmission distance to 250 meters
- Buffer optimization to guarantee the video data transmission
- VLAN configurable
- Port trunk
- STP, multicast and port mirroring
Specification
| 10/100M RJ45 | 8 Ports |
| 10/100/1000M RJ45 | 2 Ports |
| 1000M SFP | 2 (multiplex) Ports |
| Port of high priority | Port 1 to 8 |
| Store-and-forward | Support |
| MAC address table | 4K |
| MAC address learning | Automatic learning/Aging |
| Backplane bandwidth | 5.4 Gbps |
| PoE standard | IEEE 802.3af, IEEE802.3at |
| PoE cable core | Supports 8-core power supply and simultaneous power supply via the 1236 and 4578 line order. |
| PoE port | Port 1 to 8 |
| Port max. power | 30W |
| Switch max. power | 123W |
| Power Consumption | ≤150W |
| Dimension (mm) | 294*165.8*44 |
| Lighting Protection Grade For port | 4 KV |
| Lighting Protection Grade For power supply | 6 KV |
| Power Supply | 100 to 240 V AC , 50/60Hz |
| Working environment |
Temperature: 0 ºC to +40 ºC (+32 ºF to +104 ºF) Humidity: 10% to 90% (Relative humidity, without condensation) |
| Storage environment |
Temperature: -40 ºC to +70 ºC (-40 ºF to +158 ºF) Humidity: 5% to 90% (Relative humidity, without condensation) |
| Data Transfer Rate | Ethernet: 10 Mbps (half-duplex)/20 Mbps (full-duplex) Fast Ethernet: 100 Mbps (half-duplex)/200 Mbps (full-duplex) Gigabit Ethernet: 2000 Mbps (full-duplex) |
| Network Media |
Ethernet: UTP/STP of CAT3 or above Fast Ethernet: UTP/STP of CAT5 or above Gigabit Ethernet: Recommended UTP/STP of CAT5e or CAT6 1000 Base-SX: MMF (Multi-Mode Fiber) 1000 Base-LX: MMF (Multi-Mode Fiber) or SMF (Single Mode Fiber) |
| Network Standard | IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE 802.3af, IEEE802.3at, IEEE 802.3x, IEEE802.3z |